[brtab218]

I installed some Corbeau racing seats into my 05 GT. When I removed the factory seats I had to disconnect the airbag connectors. Now my airbag light is on. Bama does not adjust that part of the computer, and the dealership I called is not able to do anything. Does anyone know of some "dummy" connectors out there, or other ideas? Thanks.

 

[george06]

You must remove the OEM harness from the seats and install them in the new seats. There is a bunch of information on how to do it. Hit the search site.

 

[george06]

here you go. Corbeau CR1’s are Installed (

1 2 3)

 

[AMDanBailer]

I installed some Corbeau racing seats into my 05 GT. When I removed the factory seats I had to disconnect the airbag connectors. Now my airbag light is on. Bama does not adjust that part of the computer, and the dealership I called is not able to do anything. Does anyone know of some "dummy" connectors out there, or other ideas? Thanks.

You must remove the OEM harness from the seats and install them in the new seats. There is a bunch of information on how to do it. Hit the search site.

This is correct. You need to transfer the harness over, in order to get rid of the Airbag light. The above information should help you out!

Hit up my CS team if you have any further questions! Our Mustang Experts are here Monday-Friday from 9AM-9PM EST and Saturdays from 9AM-5:30PM EST. If you want to hit them up, their number is 866.727.1266. I can also have one of them call you directly.

-Dan

 

[brtab218]

Thanks guys! I did move the harnesses over, and I order some airbag simulator plug-ins. Hopefully they work.